Von dem Buch Mixing in the Process Industries: Second Edition haben wir 3 gleiche oder sehr ähnliche Ausgaben identifiziert!
Falls Sie nur an einem bestimmten Exempar interessiert sind, können Sie aus der folgenden Liste jenes wählen, an dem Sie interessiert sind:
100%: Harnby, N.; NIENOW, A W; EDWARDS, M F: Mixing in the Process Industries: Second Edition (ISBN: 9780750637602) in Englisch, Taschenbuch.Nur diese Ausgabe anzeigen…
100%: NIENOW, A W: Mixing in the Process Industries: Second Edition (ISBN: 9780080536583) 1997, Butterworth-Heinemann, Butterworth-Heinemann, Butterworth-Heinemann, in Englisch, auch als eBook.Nur diese Ausgabe anzeigen…
77%: Harnby, N., M.F. Edwards, and A.W. Nienow: Mixing in the Process Industries (Butterworths series in chemical engineering) (ISBN: 9780408115742) 1985, Butterworth-Heinemann Ltd, 2. Ausgabe, in Englisch, Broschiert.Nur diese Ausgabe anzeigen…
Mixing in the Process Industries: Second Edition - 10 Angebote vergleichen
Bester Preis: € 63,53 (vom 04.02.2017)1
Symbolbild
Mixing in the Process Industries (1985)
EN HC USISBN: 9780408115742 bzw. 0408115742, in Englisch, Butterworth-Heinemann Ltd, gebundenes Buch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, Versandkosten nach: USA.
Von Händler/Antiquariat, BookDepart.
Butterworth-Heinemann Ltd. 1985. Hardcover. Very Good. Hardcover; light fading, light shelf wear to exterior; otherwise contents i n very good condition with clean text, firm binding. . Books : New, Used & Rental Textbooks : Engineering : Chemical Engineering .
Von Händler/Antiquariat, BookDepart.
Butterworth-Heinemann Ltd. 1985. Hardcover. Very Good. Hardcover; light fading, light shelf wear to exterior; otherwise contents i n very good condition with clean text, firm binding. . Books : New, Used & Rental Textbooks : Engineering : Chemical Engineering .
2
Mixing in the Process Industries: Second Edition
EN NWISBN: 9780750637602 bzw. 0750637609, in Englisch, Butterworth (trade), neu.
Lieferung aus: Kanada, In Stock, plus shipping.
A W Nienow, M F Edwards, N. Harnby, Books, Science and Nature, Mixing in the Process Industries: Second Edition, This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries.The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries.The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.
A W Nienow, M F Edwards, N. Harnby, Books, Science and Nature, Mixing in the Process Industries: Second Edition, This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries.The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries.The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.
3
Mixing in the Process Industries
EN NWISBN: 9780750637602 bzw. 0750637609, in Englisch, Butterworth-Heinemann, Architectural Press, Netherlands, neu.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, in-stock.
This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agit.
This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agit.
4
Mixing in the Process Industries
EN NW EBISBN: 9780750637602 bzw. 0750637609, in Englisch, Elsevier Science, neu, E-Book.
Lieferung aus: Vereinigte Staaten von Amerika, Ebook for download.
Business, This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. eBook.
Business, This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. eBook.
5
Mixing in the Process Industries: Second Edition (1997)
EN NW EB DLISBN: 9780080536583 bzw. 0080536581, in Englisch, Butterworth-Heinemann, Butterworth-Heinemann, Butterworth-Heinemann, neu, E-Book, elektronischer Download.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, in-stock.
This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mi.
This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mi.
6
Mixing in the Process Industries (Butterworths series in chemical engineering) (1985)
EN HC USISBN: 9780408115742 bzw. 0408115742, in Englisch, 392 Seiten, 2. Ausgabe, Butterworth-Heinemann Ltd, gebundenes Buch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 1-2 business days.
Von Händler/Antiquariat, Carolina Books, Music, & More.
Intended for students and practising engineers in the chemical, industries, this rewritten and updated text is based on the long-running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers. It covers all aspects of mixing, from fundamentals through to design procedures in solid, liquid and gaseous systems. Hardcover, Ausgabe: 2nd, Label: Butterworth-Heinemann Ltd, Butterworth-Heinemann Ltd, Produktgruppe: Book, Publiziert: 1985-11, Studio: Butterworth-Heinemann Ltd, Verkaufsrang: 4488764.
Von Händler/Antiquariat, Carolina Books, Music, & More.
Intended for students and practising engineers in the chemical, industries, this rewritten and updated text is based on the long-running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers. It covers all aspects of mixing, from fundamentals through to design procedures in solid, liquid and gaseous systems. Hardcover, Ausgabe: 2nd, Label: Butterworth-Heinemann Ltd, Butterworth-Heinemann Ltd, Produktgruppe: Book, Publiziert: 1985-11, Studio: Butterworth-Heinemann Ltd, Verkaufsrang: 4488764.
7
Mixing in the Process Industries: Second Edition
EN PB NWISBN: 9780750637602 bzw. 0750637609, in Englisch, Elsevier Science, Taschenbuch, neu.
Lieferung aus: Vereinigte Staaten von Amerika, In Stock.
Mixing-in-the-Process-Industries~~A-W-NIENOW, Mixing in the Process Industries: Second Edition, Paperback.
Mixing-in-the-Process-Industries~~A-W-NIENOW, Mixing in the Process Industries: Second Edition, Paperback.
8
Symbolbild
Mixing in the Process Industries (Butterworths series in chemical engineering) (1985)
EN HC USISBN: 9780408115742 bzw. 0408115742, in Englisch, Butterworth-Heinemann Ltd, gebundenes Buch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, Versandkosten nach: USA.
Von Händler/Antiquariat, Basement Seller 101.
Butterworth-Heinemann Ltd, 1985-11-01. 2nd. Hardcover. Like New.
Von Händler/Antiquariat, Basement Seller 101.
Butterworth-Heinemann Ltd, 1985-11-01. 2nd. Hardcover. Like New.
9
Symbolbild
Mixing in the Process Industries (Butterworths series in chemical engineering)
EN HC USISBN: 9780408115742 bzw. 0408115742, in Englisch, Butterworth-Heinemann Ltd, gebundenes Buch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, Versandkosten nach: USA.
Von Händler/Antiquariat, Cloud 9 Books.
Butterworth-Heinemann Ltd. Hardcover. 0408115742 Like New Condition. . Fine.
Von Händler/Antiquariat, Cloud 9 Books.
Butterworth-Heinemann Ltd. Hardcover. 0408115742 Like New Condition. . Fine.
10
Symbolbild
Mixing in the Process Industries (Butterworths series in chemical engineering)
EN HC NWISBN: 9780408115742 bzw. 0408115742, in Englisch, Butterworth-Heinemann Ltd, gebundenes Buch, neu.
Lieferung aus: Vereinigte Staaten von Amerika, Versandkosten nach: USA.
Von Händler/Antiquariat, Cloud 9 Books.
Butterworth-Heinemann Ltd. Hardcover. 0408115742 New Condition. . New.
Von Händler/Antiquariat, Cloud 9 Books.
Butterworth-Heinemann Ltd. Hardcover. 0408115742 New Condition. . New.
Lade…